Home >
Clearance > US Robotics USR8022 802.11b Wireless Router 2 Port Switch w/ Firewall & Print Server - Retail
US Robotics USR8022 802.11b Wireless Router 2 Port Switch w/ Firewall & Print Server - Retail

Product Description
| Faster speed,
greater range, better security
U.S. Robotics makes wireless networking fast and
easy. Exclusive U.S. Robotics Accelerator Technology provides the
enhanced performance to send and receive data at speeds greater than 22
Mbps*

Start accessing the Internet from almost anywhere
wireless and extend the reach of the Internet throughout your home or
office.
The U.S. Robotics family of 22 Mbps wireless
networking products includes 256-bit Wired Equivalent Privacy (WEP)
encryption for superior security and to protect your privacy and
important data from hackers: the 22 Mbps Cable/DSL Router and Wireless
Access Point also incorporate MAC address authentication for even more
protection. Compatible with all 802.11g draft standard and 11 Mbps
802.11b wireless standard products, U.S. Robotics 22 Mbps wireless
products automatically adjust to the fastest rate possible to always
provide you with the speed you need*.
- Exclusive Accelerator Technology for enhanced
performance beyond 22 Mbps*
- Compatible with all 802.11g and 802.11b
wireless products
- Built-in 256-bit WEP encryption for superior
security
- Share cable, DSL, or dial-up Internet access
among multiple PCs
- 4 products in 1
- 2-Port Ethernet Switch
- 22 Mbps Wireless Access Point
- Router
- Print Server
|
|
Standards and
Specifications
- Integrated 22 Mbps 802.11b wireless access
point
- One RJ-45, 10/100 Mbps auto-sensing and
auto-switching Ethernet WAN port
- Two RJ-45, 10/100 Mbps auto-sensing and
auto-switching Ethernet LAN ports
- Parallel port connector for integrated print
server
RS-232 port for backup analog or ISDN modem?/sup>
DHCP server (LAN) and client (WAN)
Static and Dynamic IP addressing
PPP over Ethernet (PPPoE) support
Embedded PPTP Client
VPN pass-through support for PPTP, L2TP, and
IPSec
DMZ host support
Security Features
- 64/128/256-bit Wired Equivalent Privacy (WEP)
encryption
- MAC address authentication and wireless
association control
Modulation Type
- PBCC, CCK, QFSK, and BPSK
Radio
- Complies with IEEE 802.11b 11 Mbps wireless
standard
RF Output Power
Frequency Band
- 2400 ~2472 MHz for North America and South
America
Operating Channels
- 11 channels for North America and South America
Radio Technology
- Direct Sequence Spread Spectrum (DSSS)
Data Rate
Antenna Type
- Dual Dipole removable antennas with reverse
polarity SMA connectors
Minimum System Requirements
- For 22 Mbps wireless networking Computer with
22 Mbps 802.11b wireless adapter/access point (client mode)
- For 11 Mbps wireless networking Computer with
11 Mbps 802.11b wireless adapter/access point (client mode)
- For 256-bit WEP encryption wireless
adapter/access point (client mode) that supports 256-bit WEP
encryption
- For Ethernet networking computer with Ethernet
adapter (Network Interface Card)
- Internet access for Web sharing active Internet
connection and Internet Service Provider (ISP) account?/sup>
- HTML configuration is supported by any computer
that supports TCPIP or HTML Web browser
- CD-ROM requires Windows 98/Me/2000/XP operating
system
- 500K available hard disk space for utility and
driver installation on Windows-based PCs
- Print server requires a Windows operating
system (Windows 98/Me/2000/XP)
- CD-ROM drive
Regulatory Agency Approvals
- FCC pproved (Part 15 Class B)
- IC approved (RSS-210)
- UL/CUL listed
-
p>Environmental Specifications
- Temperature Range
- Operating: 32 ?+104 (0 ?+40 ) (Except
RF output power and sensitivity)
- Storage: 14 +140 (-10 ?+60 )
- Humidity
- Operating: 0% to 50%
- Storage: 0% to 50% Non-condensing
Package Contents
- U.S. Robotics 22 Mbps Wireless Cable/DSL Router
- Two detachable antennas
- Power supply
- One Ethernet cable
- Quick Installation Guide
- Installation CD-ROM
Package Dimensions/Weight
- Length 13.0 in. (33.0 cm)
- Width 7.0 in. (17.75 cm)
- Height 3.75 in. (9.5 cm)
- Weight 1.4 lb (0.64 kg)
Product Dimensions/Weight
- Length 5.5 in. (13.97 cm)
- Width 9.2 in. (23.36 cm)
- Depth 6.75 in. (17.14 cm)
- Weight 1.08 lb (0.49 kg)
|
|