Sparkle/Fortron Source FSP250-60GT 250W Switching ATX Power Supply w/ Noise Killer - Intel/AMD Approved

• High efficiency
• Low noise and ripple
• Output over voltage protection
• Short circuit protection on all outputs
• Resettable power shut down
• Approved by UL1950, CSA 22.2 Level 3, IDE 950, TUV EN60950

• Approved by UL 1950,CSA 22.2 Level 3 , VDE 0805
• Voltage : 90-132 VAC or 180-264 VAC switchable
• frequency : 48Hz to 63Hz

• Temperature range: Operating :0?lt;/font>C~ +50?lt;/font>C / Non-operating :-20?lt;/font>C~65?lt;/font>C
• Temperature coefficient: 0.01% / ?lt;/font>C
• Transient response: Output voltage return in less than 1 ms max. following a 35% load change
• Hold up time:16 ms minimum at full load & nominal input voltage
• Dielectric withstand:Input/output 1800 VAC for 1 second, input to frame ground 1800 VAC for 1 second
• Humidity:90~95% RH
• Efficiency: 65% Min.,70% typical,at full load
• Power good signal: On delay 100 ms to 500 ms, off delay 1 ms
• Overload protection: 150% Max
• Inrush current:45A max for 115 VAC or 80A max for 230 VAC at 25?lt;/font>C ambient cold start
• Over voltage protection: +5V output: 6V?lt;/font>0.5V

Click here for downloading detailed specification (Microsoft Word format)

MINIMUM LOAD

MAXIMUM LOAD

LOAD REG.

CROSS REG.

LINE REG.

RIPPLE & NOISE

*+3.3V

0.2A

7.0A

3.3A/14A

?lt;/font> 5%

?lt;/font> 1%

60mV P-P

+5V

2.0A

10.0A

25A/18A

?lt;/font> 5%

?lt;/font> 1%

60mV P-P

+12V

0.2A

4.0A

8.0A

?lt;/font> 5%

?lt;/font> 1%

150mV P-P

-5V

0.0A

0.15A

0.3A

?lt;/font> 10%

?lt;/font> 2%

100mV P-P

-12V

0.0A

0.5A

0.8A

?lt;/font> 10%

?lt;/font> 2%

150mV P-P

+5Vsb

0.0A

0.4A

0.8A

?lt;/font> 5%

?lt;/font> 1%

60mV P-P