Home > Cases & Power Supplies > SPI Sparkle Power FSP P4 Flex ATX 200W 1U Power Supply Full Range PFC Ball Bearing Fan FSP200-50PLA

SPI Sparkle Power FSP P4 Flex ATX 200W 1U Power Supply Full Range PFC Ball Bearing Fan FSP200-50PLA

SPI Sparkle Power FSP P4 Flex ATX 200W 1U Power Supply Full Range PFC Ball Bearing Fan FSP200-50PLA
Item# NPSFS20050PLA
$49.00
Availability: Usually ships the next business day.

Product Description

FSP200-50PLA

FLEX ATX
P4 1U 200W B.B. Fan Full Range PFC (F061)
Watt: 200
Dimension: 150*81.5*40.6mm

>> Download Spec. Sheet

>> Download PDF Drawing

Features:
v High efficiency

v Low ripple &Noise

v Output over Voltage Protection OVP

v Short circuit protection on all output

v Reset table power shut down

v Approve by UL, CAS

v Internal 4cm fan

v 100% burn-in under high ambient temperature (50ºC) vacuum-impregnated transformer

v MTBF: 100K hours at 25ºC

v 100% Hi-pot tested

v Line input fuse protection

Input Characteristics:
 Voltage: 115/230 VAC

v Frequency: 47Hz to 63Hz

v Input current:
4A max./ 115 Vrms, 50 Hz
2A max/ 230 Vrms, 60 Hz

 Specifications:
v Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).

v Temperature range: operating 0º ~50ºC, storage-20º ~ +80ºC

v Temperature coefficient: 0.01% / 0ºC

v Transient response: output voltage recovers in less than 1 ms max. following a 25%load change

v Hold-up time: 17ms minimum at full load & nominal input voltage

v Humidity: 5~95% RH

v Efficiency: 70% min. at full load

v Power good signal: turn-on delay 100ms to 500ms

v Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second

v Overload protection: 150% max.

v Inrush current: 50A cold, 80A ware at 132VAC

v Over voltage protection:
+5V output: 6.82V max.
+3.3V output: 4.5V max.

v Fan Noise Killer Optional


　

Output Characteristics: