Home > Cases & Power Supplies > PowerMan/Fortron 460W Power Supply w/Ball Bearing Fan for Dual AMD MP CPU Motherboards FSP460-60PFNA

PowerMan/Fortron 460W Power Supply w/Ball Bearing Fan for Dual AMD MP CPU Motherboards FSP460-60PFNA

PowerMan/Fortron 460W Power Supply w/Ball Bearing Fan for Dual AMD MP CPU Motherboards FSP460-60PFNA
Item# NPS460PFNAMD
$79.00
Availability: Usually ships the next business day.

Product Description

Features

  • High Efficiency
  • Active PFC circuit meet EN6100-3-2
  • Internal 12 VDC fan (ball bearing)
  • Low noise and ripple
  • Complies with FCC part 15 subpart J class B 115VAC operation and CISPR 22 class B at 230VAC operation
  • Output over voltage protection
  • Short circuit protection on all outputs
  • MTBF above 100,000 hrs. at 25* C
  • 100% Hi-pot & ATE tested
  • Short circuit protection on all outputs
  • Resettable power shut down
  • 100% burn-in under high ambient temp. (50* C)
  • Approved by UL 1950, CSA C22.2 Level 3, IEC 950, VDE 0805, NEMKO (CB Report)

Input Characteristics

  • Input Range: 90~265 VAC, full range
  • Frequency: 47-63 Hz
  • Input Current: 9A (RMS) @115VAC, 5A (RMS)@230VAC
  • Inrush Current: 80A Max, for 115 VAC, 120A Max for 230VAC

Output Characteristics

 

Output Voltage
Minimum Load
Maximum Load
Load Reg.
Line Reg
Ripple & Noise
+3.3V
0.4A
27A
+/-5%
+/-1%
50mV P-P
+5V
5A
29A
+/-5%
+/-1%
50mV P-P
+12V CPU
2.0A
16.5A
+/-5%
+/-1%
120mV P-P
+12V I/O
2.0A
15
+/-5%
+/-1%
120mV P-P
-5V
0.0A
0.3A
+/-10%
+/-2%
120mV P-P
-12V
0.0A
0.8A
+/-10%
+/-2%
120mV P-P
+5V sb
0.0A
2.0A
+/-5%
+/-1%
50mV P-P

* Maximum power: 460W
* +5V and +3.3V total output not exceed 220W
* +3.3, +5 and +12V total output power shall not exceed 440W
* Dimensions (WxHxL): 150x86x140(mm)/5.9"x3.4"x5.5"

Specification

  • Temperature Range: Operating 0* C ~ 50* C; storage & shipping -20*C ~ 65* C
  • Temperature Coefficient: 0.01% / *C
  • Transient Response: Output voltage returns in less than 1 ms max. at a 25% load change
  • Hold-up Time: 18 ms minimum at full load and nominal input voltage
  • Dielectric Withstand: Input to frame ground 1800 VAC for 1 second
  • Humidity: 95% RH
  • Efficiency: 68% at a minimum measured at nominal AC main voltage and frequency with maximum load on all output
  • Power Good Signal: Power on delay taim 100 ms to 500 ms, off delay 1 ms minimum
  • Overload Protection: 150% Max.
  • Over Voltage PRotection: +3.3V output: 4.5V: +5V output; +12V output: 14.5V

Remote ON/OFF Control

  • The power supply shall accept a logic open collector level which will disable/enable all the output voltages (exclude +5V standby)
  • As logic level is low/high, output voltages are to be enabled/disables