Home > Cases & Power Supplies > PowerMan/Fortron 300W Ultra Quiet ATX Power Supply w/Ball Bearing Fan Intel P4/AMD Approved ATX-300GT

PowerMan/Fortron 300W Ultra Quiet ATX Power Supply w/Ball Bearing Fan Intel P4/AMD Approved ATX-300GT

PowerMan/Fortron 300W Ultra Quiet ATX Power Supply w/Ball Bearing Fan Intel P4/AMD Approved ATX-300GT
Item# NPS300GT
$29.00
Availability: Usually ships the next business day.

Product Description

Product Information

Reviews in Tom's Hardware : http://www4.tomshardware.com/howto/20021021/powersupplies-08.html#summary_of_all_power_supplies_updated

ATV series power supplies are designed to have straight airflow. Great for cases dissipate its heat! Noise killer is standard.

Features: High efficiency. Low noise and ripple. Output over voltage protection. Short circuit protection on all outputs. Reset table power shut down. Approve by UL, CSA TUV, NEMKO CB &CE. Internal 12 VDC fan, ball bearing. 100% burn-in under high ambient temperature (50簞C). Vacuum-impregnated transformer. MTBF: 100K hours. 100% Hi-pot tested. line input fuse protection. With Fan Noise Killer.

Specifications: Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby). Temperature Range: Operating 0?C ~ 50?C; storage & shipping -20?C ~ 65?C. Temperature Coefficient: 0.01% / ?C. Transient response: output voltage recovers in less than 1 ms max. Following a 25%load change. Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second. Humidity: 5~95% RH. Efficiency: 65% min. 70% typical, at full load. Power good signal: turn-on delay 100ms to 500ms. Overload protection: 150%max. Inrush current: 60A cold, 80A warm at 264 VAC. Over voltage protection: +5V output: 6.5V. +3.3V output: 4.6V. +12V output: 15.5 V. Voltage: 115/230VAC(without PFC). Frequency: 47Hz to 63Hz. Input current: For 300 W: 9.0A maximum / 115V, 60Hz. 4.0A maximum / 230V, 50Hz. DC output: +3.3V: 28A; +5V: 30A; +12V: 15A; -12V: 0.3A; -5V: 0.8A; +5VSB: 2A. Six IDE connectors, two floppy connectors, +12V power connector, Aux power connector.

AMD Home

navbar

AMD Athlon??Processor Recommended Power Supplies

 

Features

  • High efficiency
  • Low noise and ripple
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • Approved by UL 1950, CSA 22.2 Level 3, TUV EN60950, IEC 950
  • Internal 12 VDC fan provided
  • Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 230 VAC operation
  • 100% burn-in under high ambient temperature (50簞 C)
  • MTBF above 100,000 hrs at 25簞 C
  • 100% Hi-pot & ATE tested
  • Built-in EMI filter

Input Characteristics

  • Voltage: 90-132 VAC or 180-264 VAC switchable
  • Frequency: 47Hz to 63Hz
  • Input current: 10.0A(RMS) for 115 VAC, 5.0A(RMS) for 230 VAC

Specification

  • Temperature range: operating 0簞 C~50簞 C; Non-operating: -20簞 C~80簞 C
  • Temperature coefficient: 0.01%簞 /C
  • Transient response: Output voltage returns in less than 1 ms max. following a 25% load change
  • Hold up time: 16ms minimum at full load & nominal input voltage
  • Dielectric withstand: Input to frame ground 1800 VAC for 1 second
  • Humidity: 5~95% RH
  • Efficiency: 65% Min., 70% typical, at full load
  • Power good signal: Power on delay time 100 ms to 500 ms, power fail ≧ 1 ms
  • Overload protection: 150% Max.
  • Inrush current: 80A max. for 115 VAC or 100A max. for 230 VAC at 25簞 C ambient cold start
  • Over voltage protection:
+3.3V output: 4.5V max
+5V output: 6.5V max
+12V output: 15 V max

Remote ON/OFF Control

  • The power supply shall accept a logic open collector level which will disable/enable all the output voltage. (exclude +5V stand by)
  • As logic level is low, outputs voltage were enable.
  • As logic level is high, outputs voltage were disable.
 

MINIMUM LOAD

NORMAL LOAD

MAXIMUM LOAD

LOAD
REG.

CROSS
REG.

LINE
REG.

RIPPLE & NOISE

*+3.3V

0.2A

14A

0.2/14

簣   4%

簣   5%

簣 1%

50mV P-P

+5V

2.0A

14A

30/20.7A

簣   5%

簣   5%

簣 1%

50mV P-P

+12V

0.0A

6.0A

11A

簣   5%

簣   5%

簣 1%

120mV P-P

-5V

0.0A

0.4A

0.3A

簣   5%

簣   5%

簣 1%

100mV P-P

-12V

0.0A

0.15A

0.8A

簣 10%

簣   10%

簣 2%

120mV P-P

+5Vsb

0.0A

1.0A

2.0A

簣   5%

簣   5%

簣 1%

50mV P-P

+3.3V & +5V total output not exceed 220 watts.
*OPTIONAL

Safety